OSCILLOSCOPE

• MPO-2000P:200MHz; 4CH/2CH
• MPO-2000B:100MHz; 4CH/2CH
• Allow to use Python scripts to control for automation purpose
• Dual Channel Spectrum analyzer with Spectrogram

OSCILLOSCOPE

• 650MHz /350MHz Bandwidth, 2 or 4 Input Channels
• 5GSa/s Real-time Sampling Rate(half channels); 2.5GSa/s Real-time Sampling Rate(all channels)
• Per Channel 200Mpts Memory Depth

OSCILLOSCOPE

• 300/200/100MHz bandwidth selections ;2 channels
• Real time sampling rate is 2GSa/s max.
• Per Channel 20M memory depth and VPO waveform display technology
• Waveform update rate up to 120,000 wfms/s

SPECTRUM ANALYZERS

• Frequency Range: 9kHz ~ 3.25GHz
• 0.025ppm Frequency Stability and 1ppm aging Rate
• RBW: 1Hz ~ 1MHz (3dB), 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
• Fastest sweep time: 204us
• Sensitivity: -149 dBm/Hz (@PreAmp on)

SPECTRUM ANALYZERS

• Frequency Range: 9kHz ~ 8.0GHz / 3.8GHz / 1.8GHz
• RBW: 1Hz ~ 1MHz in 1-3-5-10 steps
• Phase Noise: -104 dBc/Hz
• Sensitivity: -160dBm/Hz Typical @PreAmp On
• Display: 10.4" XGA Output (1024*768)

SPECTRUM ANALYZERS

• Frequency Range : 150kHz ~ 3GHz
• Autoset Function
• Noise Floor: ≦-100dBm
• RBW Range : 30kHz, 100kHz, 300kHz, 1MHz
• ACPR/CHPW/OCBW Measurement

Signal Generators

• 1uHz to 20 or 30MHz, 16-bit resolution with 1 mVpp to 10 Vpp amplitude. 1 or 2 channel (s)
• 250 MSa/s sampling rate for higher time resolution arbitrary waveforms
• 8M Points/channel standard waveform memory

Signal Generators

• Maximum Five Output Channels
• - 2 Equivalent Performance Arbitrary Channels Frequency : 1μHz~10/20/30/60/200MHz
• - RF Channel Frequency (FG/ARB/MOD) : 160/320MHz
• - Pulse Generator Frequency : 25MHz

DC Power Supplies

• Programming resolution: 1mV/ 0.2mA (GPP-3610H); 2mV/0.2mA (GPP-7250)
• Readback resolution: 0.1mV/ 0.1mA
• Low ripple noise: ≦ 1mVrms / ≦2mArms

DC Power Supplies

• CV, CC priority start function.
• Four levels of current measurement resolution (min. 0.1μA) / two levels of voltage measurement resolution (min. 0.1mV)
• Power output ON/OFF delay function
• Adjustable voltage and current slew rate

DC Power Supplies

• Constant Power Output for 5 Times Multi-range(V&I) Operation
• Natural Convection Cooling Design (Fanless Structure)
• Preset Memory Function
• Output ON/OFF Delay Function
• CV, CC Priority Mode

DC Power Supplies

• 1 Independent Isolated Output
• 4.3 Inch LCD Display
• Setting & Read back Resolution 100mV / 10mA (*1)
• Output ON/OFF

DC Power Supplies

• 0.01% High Regulation
• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise

DC Power Supplies

• Dual Measurement Display
• 0.01 % High Regulation
• Constant Voltage and Constant Current Operation
• High Efficiency
• High Power Density

DC Power Supplies

• 1/2/3 independent isolated output channels
• GPE-3060 provides CH1/CH2: 0 ~ 30V / 0 ~ 6A output; CH3 supports 5.0V at 5A
• GPE-6030 supports CH1/CH2: 0 ~ 60V / 0 ~ 3A output; CH3 supports 5.0V at 5A
• Series/parallel tracking function

DC Power Supplies

• 2/3/4 Independent Isolated Output
• Four "3 Digits" LED Displays
• 0.01% Load and Line Regulation
• Low Ripple and Noise

DC Power Supplies

• Maximum Output: ±210V/±1.05A/22W
• Built-in 4 Sequence Output Modes, up to 2500 Points
• OVP /OTP Protection Function
• 0.012% Basic Measure Accuracy with 6½-digit Resolution

AC Power Supplies

• Adopts third-generation semiconductor silicon carbide (SiC) technology to create a 4U 6kVA high-performance AC/DC power source with high power density
• AC input supports single-phase and three-phase, phase voltage 200V to 240V±10% (Delta or Y connection)

AC Power Supplies

• Output Rating: AC 0 – 400 Vrms, DC 0 - ± 570 V
• Output Frequency up to 999.9 Hz (ASR-3400HF up to 5000Hz)
• DC Output (100% of Rated Power)
• Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF

Electronic Loads

• 7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
• Fast/ Normal Sequence Function
• Soft Start
• Battery discharge test
• OCP、OPP test Automation

Electronic Loads

• 5 digital V / A / W Meter can be displayed on Large LCD display simultaneously
• Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation modes
• Surge Test mode for Capacitive load for current rising transient test

Electronic Loads

• CC, Linear CC, CR, CV, CP and AC Rectifier Load Mode
• Frequency Range : DC, 40~440Hz
• Turbo Mode for 2 Times the Current and Power of Electronic Load within 1 Second

Data Acquisition System (DAQ)

• Large 4.3”TFT color display
• 3-slot mainframes with built-in 6 ½ digit DMM
• Basic 0.0035% DCV accuracy
• 6 selectable switch modules
• Up to DC 600V / AC 400V voltage measurement (DAQ-909 module)

Digital Meter

• Auto Ranging (GDM-541/533/532)
• True RMS (GDM-541/533/532)
• Analog Bar (GDM-541/533)
• USB (GDM-541/533)
• Auto Ranging (GDM-541/533/532)

Digital Meter

• 6 1/2 Digit Display:1,200,000 Counts
• 4.3 TFT Graphic LCD
• DCV Basic Accuracy:0.0035%(GDM-9061)/0.0075%(GDM-9060)

Digital Meter

• Auto Range, Expect Current Measurement
• Auto Power Off
• Max Hold
• True RMS Measurement (GCM-407)
• (AC)600A/600V Max Input (GCM-403)

LCR Meter

• Wide Test Frequency：
• -- LCR-8200A:DC, 10Hz~50/30/20/10/5 MHz
• -- LCR-8200:DC, 10Hz~30/20/10/5/1 MHz
• 7" LCD color Display

LCR Meter

• 2.8” TFT Touch LCD
• 50,000 Counts Resolution on Primary and Secondary Display
• 0.2% Basic Accuracy
• Six or Eight Selectable Test Frequencies Depends on Model

Safety Testers

• DC 12kV / IR 5kV
• Comply with IEC 61010-2-034
• 7”TFT LCD
• Manual / Auto Mode

Safety Testers

• Suitable for Medical Electrical & General Electrical of Leakage Current Measurement
• 7" Touch Pane with Color LCD
• 12 Different Measurement Network to Simulate the Resistance of Human Body (Including IEC 60601-1:2020 3.2rd)

Safety Testers

• 150VA AC Test Capacity
• 3 in 1 Tester : AC, DC, IR
• Built-in 8 channel Scanner
• 480 x 272 Color TFT LCD
• Test parameter Export / Import through USB host

Digital Power Meter

• 5” TFT LCD
• Voltage/Current Test Freq. Bandwidth: DC, 0.1Hz~ 100kHz
• Waveform Display : V (Voltage), I (Current), P (Wattage)
• Distorted wave Current/Voltage measurement: full range for CF=3, and half range for CF=6 (or 6A)

DC Milli-Ohm Meter

• 50,000 counts
• 3.5” (320 x 240) TFT LCD display
• High accuracy of 0.05% precision
• 1Amp test current, 0.1µΩ resolution
• Fast measurement of 60 readings per second
• Four wire resistance measure

Battery Meter

• 3.5’ TFT LCD (320x240)
• Measurement items: DC voltage and AC resistance
• Voltage measurement: 1000V (GBM-3100H) or 300V (GBM-3300) or 80V (GBM-3080)
• Resistance measurement: 0mΩ~ 3.2kΩ(max.)